A copied trade is two orders at two brokers. The master account fills first, the copier notices, and only then does each follower account send its own order. Every network hop in that chain adds delay, and the biggest one is distance: Microsoft measures a typical 78 ms round trip between its London and Virginia data centres, against 11 ms between London and the Netherlands [1]. If your master and follower brokers sit on opposite sides of the Atlantic, no Forex VPS can remove that gap.
What a VPS (a rented Windows server in a data centre) can do is keep every terminal online and close to the brokers. That matters more for copying than for a single Expert Advisor (EA), because one stalled master terminal stops every follower at once.
This guide compares six ways to host an MT4 trade copier: VPSForexTrader, NYCServers, VPSforFX, MyForexVPS, QuantVPS and MetaQuotes’ own MetaTrader VPS. VPSForexTrader and VPSforFX are the only two that state ECC memory on every plan and install Windows Server 2025 by default. NYCServers and MyForexVPS pre-install MetaTrader, and QuantVPS installs it at checkout. MetaTrader VPS is the only option with copying built in, through MQL5 Signals, but it hosts one account per subscription. None of the five Windows hosts bundles trade copier software.
It is written for traders who copy between their own accounts, run prop firm evaluations from one master, or follow a signal, on MT4 with notes on MT5.
The short version
VPSForexTrader Smart runs in Equinix LD3 London, Equinix NY2 New York, Serverius Amsterdam or Equinix HK4 Hong Kong, with 3 AMD EPYC cores, 4 GB of ECC memory, 120 GB of NVMe storage and Windows Server 2025, rated for up to 4 terminals at $31.99 a month. It publishes dated latency tables for named brokers from its London and New York nodes.
NYCServers Standard runs in LD4 London or NY4 New York, among six sites, with 2 cores, 4 GB of DDR5 memory and MT4 and MT5 pre-installed, rated for 3 to 6 trading accounts at $40.00 a month. Its planned maintenance stays inside the forex weekend.
VPSforFX Standard runs in London, New York, Amsterdam or Hong Kong, with 2 AMD EPYC cores, 4 GB of DDR4 ECC memory, 70 GB of NVMe storage and Windows Server 2025, rated for 6 terminals at $29.99 a month.
MyForexVPS Gold has 2 cores, 4 GB of memory, 70 GB of SSD storage and pre-installed terminals, rated for 3 to 6 terminals at $19.99 a month, the lowest list price here. Its weekend maintenance window runs to 23:00 UK time on Sundays during British Summer Time.
QuantVPS VPS Pro has 6 AMD EPYC cores and 16 GB of DDR4 memory in NY4 or LD4, rated for 3 to 5 terminals at $99.99 a month. Its $29.99 Starter plan is rated for 0 to 1 terminals.
MetaTrader VPS costs $15 a month per trading account, is rented from inside MetaTrader, allocates up to 3 GB of memory, and keeps MQL5 Signals copying around the clock, but it blocks DLL calls and gives you no desktop to log into.
How this comparison was built
This comparison is compiled from provider documentation, live pricing pages, public software documentation, and vendor-published performance data, captured on October 15, 2026. Vendor-published figures are labeled as such. Providers were evaluated on data centre disclosure, ECC memory, Windows version, published broker latency, terminal capacity per plan, pre-installed MetaTrader, built-in copy tools, maintenance and uptime terms, and the monthly price of the cheapest plan rated for four or more terminals. Where a provider does not publish a specification, the gap is stated rather than estimated.
The order follows a published score. Each provider earns one point for each of four things its public pages state: the data centre it uses, ECC memory on every plan, the Windows version that comes with the plan, and latency figures for named brokers. VPSForexTrader scores 4, NYCServers and VPSforFX 3, MyForexVPS 2, QuantVPS 1 and MetaTrader VPS 0. The one tie is broken by a published uptime SLA with service credits, which NYCServers has and VPSforFX does not, so NYCServers is second and VPSforFX third.
When a provider does not mention ECC memory, that is a gap in what it has written down, not proof that its servers lack it. Prices are on monthly billing and exclude VAT. No forex VPS provider has its latency figures independently audited, and copier vendors’ speed claims are their own.
Where copy delay comes from
A local trade copier on one VPS works in four steps. The master terminal receives the fill from the master broker. Next, the copier, usually an EA running in the master and follower terminals, picks up the new position. Each follower terminal sends its own order, and the follower broker fills it. Two of those steps cross the network, the fill reaching the master terminal and each follower order reaching its broker, so the distance from your VPS to each broker decides most of the delay.
When both brokers host their servers in the same city as the VPS, each network leg is short. VPSForexTrader’s own tables, for example, show 1.65 to 2.1 ms from its London node to the four brokers listed on its London page, and 1.19 to 1.51 ms from its New York node to the four listed there [7]. Those are vendor figures, but they show the scale: a few milliseconds for the whole path.
Cross a region and the numbers change by an order of magnitude. Microsoft’s typical round trips over the 30 days to July 30, 2026 were 78 ms from London to Virginia, 83 ms from Virginia to the Netherlands, and about 200 ms from London, Virginia or the Netherlands to Hong Kong [1]. With a master broker in London and a follower broker in New York, one leg of the copy path pays that distance whichever city hosts the VPS.
The copier itself adds less than most traders expect. FX Blue says its Personal Trade Copier is “limited only by your broker’s speed” [3], and Duplikium states internal processing of 1 to 3 ms [4]. The broker’s own execution time sits on top of every figure here, and no VPS controls it.
Three ways to copy MT4 trades
A local copier on your own VPS. The copier runs as an EA in every terminal, and all terminals sit on the same Windows server. FX Blue’s Personal Trade Copier is free, works between MT4 and MT5, and copies only between installations on the same computer [3]. For copying across machines, FX Blue offers a separate Internet Trade Mirror. This is the setup every Windows VPS in this guide supports, and it is the only one where you choose the city for both network legs.
A cloud copier with no VPS. Duplikium and Social Trader Tools connect to your broker accounts from their own servers. Duplikium says no VPS, PC or server is needed, supports MT4, MT5, cTrader and several other platforms, and charges from 9 euros per account per month for up to 10 accounts, falling to 6 euros above 1,000 [4]. Social Trader Tools is web-based, supports MT4 and MT5 including MT4 to MT5 copying, and advertises a 50 ms average copy time, a vendor claim [5]. You give up control of where the copier runs.
Copying built into MetaTrader. MQL5 Signals let a subscriber copy a published signal account inside the terminal. MetaTrader VPS can take over a signal subscription: after migration, copying is switched off in the local terminal and switched on in the hosted one [6]. This is the only built-in copy tool among the six options, but it copies public signals into one account per subscription, not your own master into many followers.
The six options at a glance
Each row shows the cheapest plan the provider rates for four or more terminals, which covers one master and three followers, on monthly billing, captured on October 15, 2026.
| Provider and plan | Data centres (as published) | Processor | Memory | Storage | Windows | Terminals per plan (vendor-stated) | Price per month |
| VPSForexTrader Smart | Equinix LD3, Equinix NY2, Serverius Amsterdam, Equinix HK4 | 3 AMD EPYC cores | 4 GB, ECC stated | 120 GB NVMe with HA | Server 2025 Standard | Up to 4 | $31.99 |
| NYCServers Standard | LD4, NY4, TY3, SG1, HK1, DUB1 (operator not named) | 2 cores | 4 GB DDR5, ECC not publicly specified | 70 GB NVMe | Server 2022 | 3 to 6 accounts | $40.00 |
| VPSforFX Standard | London, New York, Amsterdam, Hong Kong | 2 AMD EPYC cores | 4 GB DDR4, ECC stated | 70 GB NVMe with HA | Server 2025 | Up to 6 | $29.99 |
| MyForexVPS Gold | London, Amsterdam, New York, Singapore (buildings not named) | 2 cores, model not publicly specified | 4 GB, ECC not publicly specified | 70 GB SSD | Server 2019 or 2022 | 3 to 6 | $19.99 |
| QuantVPS VPS Pro | NY4 or LD4 for forex plans (as labeled) | 6 AMD EPYC 7003 cores | 16 GB DDR4, ECC not publicly specified | 150 GB NVMe | Server 2022 | 3 to 5 | $99.99 |
| MetaTrader VPS | More than 30 hosting points, matched to the broker | Not publicly specified | Up to 3 GB | Up to 16 GB | Not applicable, no desktop access | One account per subscription | $15.00 per account |
How the same six handle copy-related features and service terms:
| Provider | MetaTrader installed | Built-in copy tool | Broker latency data | Maintenance window (UK time, October 2026) | Uptime SLA | Trial and refund |
| VPSForexTrader | You install it | None | Per-broker tables with dated stamps, method not described | None published; pages say no maintenance on trading days | None published | $0.99 three-day trial; 14-day refund, trial excluded |
| NYCServers | MT4 and MT5 pre-installed | None | Per-broker table, method not stated | Friday 22:00 to Sunday 22:00 | 100 percent in market hours, with credits | No trial; 14-day refund on VPS, once per account |
| VPSforFX | You install it | None | Per-broker table from four cities, undated, method not described | None published; location pages say no service termination on forex days | 99.92 percent uptime figure | $0.99 three-day trial; 14-day refund, trial excluded |
| MyForexVPS | MT4 and MT5 pre-installed | None | Per-broker table, no date or method | Saturday and Sunday, 10:00 to 23:00 during BST | 99.99 percent, with credits | No trial; 7-day refund |
| QuantVPS | MT4 or MT5 installed at checkout | None; third-party copiers supported, licences separate | Route target of 0 to 10 ms | Saturday 04:00 to Sunday 03:00 | 99.999 percent, with credits | No trial; 14-day refund on new |
| MetaTrader VPS | Hosts your own terminal | MQL5 Signals | Not published | Not published | None published | 24-hour free trial |
Sizing a copier server: one master, many followers
Every account in a copy setup needs its own terminal, so a master with five prop firm accounts is six terminals, not one. Windows takes its share first: Microsoft lists 2 GB of memory as the minimum for Windows Server 2025 with the desktop and recommends 4 GB [2]. Each terminal then adds its own history and indicator buffers, which MetaQuotes says “can become hundreds of megabytes” with a large Max bars setting [2]. Copier terminals rarely need deep history, so cutting Max bars in each follower is the cheapest way to fit more of them.
Two limits apply whatever the hardware. VPSForexTrader’s setup guide says Windows has a limit of 32 MT4 platforms, that the workaround is a second Windows user, and that it advises running no more than 12 MT4 instances per user [7]. MetaQuotes does not document this limit, so treat it as the provider’s field guidance. The same provider’s install guide puts each MT4 platform in its own uniquely named folder [7], so every extra follower broker means one more installation to keep updated.
Terminal ratings differ widely between providers. NYCServers rates its 4 GB Standard plan for 3 to 6 accounts and MyForexVPS rates its 4 GB Gold plan for 3 to 6 terminals [8][9]. VPSforFX rates its 4 GB Standard for six, although its FAQ gives different counts [12]. QuantVPS rates its 4 GB Starter for 0 to 1 terminals and says its ranges “are not simultaneous maximums” [10]. VPSForexTrader rates 4 GB for up to 4 terminals, 6 GB for up to 7 and 8 GB for up to 10 [7]. None of these numbers is a measurement you can repeat, so check memory and CPU use in Task Manager during a busy session before adding followers.
VPSForexTrader
Infrastructure tier: managed forex VPS on AMD EPYC with ECC memory and high-availability NVMe storage
Locations: Equinix LD3 London, Equinix NY2 New York, Serverius Amsterdam, Equinix HK4 Hong Kong
First place goes to VPSForexTrader because its public pages answer all four scored questions. It has hosted forex VPS since 2011, and its VPS pages say each server gets dedicated vCPU, ECC RAM and NVMe storage [7].
VPSForexTrader Smart is a managed Windows VPS designed for running a master terminal and up to three followers near the brokers’ servers. Each Smart server has 3 AMD EPYC cores, 4 GB of ECC memory, 120 GB of NVMe storage with high availability, weekly backups and Windows Server 2025 Standard, for $31.99 a month [7]. Boost adds 6 cores, 6 GB of ECC memory, 180 GB and daily backups for up to seven terminals at $54.99, and Max has 8 cores, 8 GB of ECC memory and 250 GB for up to ten at $79.99. VPSForexTrader is one of the few providers in this comparison that offers ECC memory on every plan and installs Windows Server 2025 by default. For one master and three followers at brokers in London, New York, Amsterdam or Hong Kong. Smart is the lowest-priced four-terminal plan here that states ECC memory and names its data centres, at $31.99 a month.
The latency tables are the most useful part for copy traders, because they let you check both brokers before you choose a city. On October 15, 2026, the London page listed LMAX Broker Europe at 1.71 ms, Forex Club at 1.65 ms, ET Global at 2.1 ms and Broctagon at 1.9 ms, stamped “Data updated 2026-10-14 22:00 UTC”. The New York page listed FP Markets LLC at 1.19 ms, Pepperstone Group at 1.3 ms, Go Markets at 1.23 ms and TMGM at 1.51 ms, stamped 21:01 UTC the same day [7]. Both pages show lower headline ranges, 1.06 to 1.12 ms in London and 1.09 to 1.24 ms in New York, and neither page explains how the figures are measured.
MetaTrader is not pre-installed on the VPS plans; you install it over remote desktop, and support can help [7]. The New York page says copy trading keeps working when your own device is off, and the London and New York pages state that servers are not taken down for maintenance on active trading days. Its Terms, however, keep the right to carry out maintenance without notice and disclaim liability for outages, and no uptime SLA is published [7]. A $0.99 three-day trial runs on Smart in London, Amsterdam or New York, emails a reminder before it ends, and then continues at $31.99 a month unless cancelled. Payment is by card, PayPal or cryptocurrency.
Best fit: one master and up to nine followers on one server, at brokers in the same city as one of its four nodes, where ECC memory and Windows Server 2025 matter. Less ideal if: your master and followers trade at brokers in different regions, you want MetaTrader pre-installed, or you need a written uptime SLA with credits.
Strengths
- ECC memory stated on Smart, Boost and Max
- Windows Server 2025 Standard by default
- dated per-broker latency tables for its London and New York nodes
- a $0.99 three-day trial in three cities
- free backups
Limitations
- no published uptime SLA, and the Terms disclaim liability for outages
- MetaTrader is not pre-installed on VPS plans
- the latency tables do not describe their method, and some of their figures sit above the headline ranges
NYCServers
Infrastructure tier: trading VPS and dedicated servers
Locations: LD4 London, NY4 New York, TY3 Tokyo, SG1 Singapore, HK1 Hong Kong, DUB1 Dublin
NYCServers, the trading name of Greenhill Technologies Inc., sells forex VPS and dedicated servers in six data centres it names by code [8]. Its plans are sized in trading accounts rather than terminals: Basic (2 cores, 2 GB of DDR5, 60 GB of NVMe) for 1 to 2 accounts at $25.00, Standard (2 cores, 4 GB, 70 GB) for 3 to 6 at $40.00, and Professional (4 cores, 8 GB, 100 GB) for 7 to 8 at $60.00, on monthly billing. The FAQ on the same page gives different ranges, 1 to 2, 3 to 5, 6 to 8 and 10 or more, so treat the account counts as guidance. A dedicated server for up to 25 accounts costs $175 a month.
MT4 and MT5 come pre-installed on Windows Server 2022, and a new VPS is advertised as ready in 30 seconds [8]. The site does not say whether the memory is ECC. On the London page, 12 brokers are listed at 1.01 to 1.07 ms from LD4, including FOREX.com and Vantage, without a stated method.
Planned maintenance runs from Friday 17:00 to Sunday 17:00 Eastern Time, which is Friday 22:00 to Sunday 22:00 UK time, with at least 24 hours’ notice, although emergency work can happen during trading hours [8]. The SLA promises 100 percent availability during market hours, with credits from 10 percent of a month’s fee up to the full fee below 99.1 percent. VPS refunds are available within 14 days, once per account, and dedicated servers are not refundable.
Strengths
- LD4 and NY4 named for London and New York
- MT4 and MT5 pre-installed
- planned maintenance confined to the forex weekend
- an SLA with credits during market hours
Limitations
- ECC memory status not publicly specified
- account ranges on the plan cards and FAQ disagree
- Windows Server 2022 rather than 2025
- broker latency published without a method
- no trial, one VPS refund per account, and no refunds on dedicated servers
VPSforFX
Infrastructure tier: forex VPS on AMD EPYC with DDR4 ECC memory and high-availability NVMe storage
Locations: London, New York, Amsterdam, Hong Kong
VPSforFX scores 3: its pages state ECC memory on every plan, Windows Server 2025 and per-broker latency [12].
Its plan cards are sized in terminals. Starter (1 AMD EPYC core, 2.5 GB of DDR4 ECC memory, 50 GB of NVMe) is rated for 2 terminals at $19.99 a month, Standard (2 cores, 4 GB, 70 GB) for 6 at $29.99, and Enterprise (12 cores, 16 GB, 100 GB) for 32 at $149.99, all on Windows Server 2025 with high-availability NVMe storage [12]. Paying yearly brings Standard to $269.91, about $22.49 a month.
The broker latency page lists each broker’s servers from the UK, New York, Netherlands and Hong Kong: LMAX Broker Europe at 1.55 to 1.75 ms and Broctagon at 1.73 ms from the UK, and FP Markets LLC at 1.19 to 1.93 ms and Go Markets at 1.23 to 1.95 ms from New York, with no date stamp or method [12]. That is enough to check both brokers in a copy pair before you choose a city. MetaTrader is not pre-installed; the setup FAQ tells you to install your platforms after activation. The homepage states 99.92 percent uptime, the location pages say servers are not terminated on forex days, and the Terms allow maintenance without notice and disclaim liability for outages. The $0.99 three-day trial runs on Standard in London, New York or Hong Kong, sends an email before it ends, and is excluded from the 14-day money-back guarantee. Payment is by card, PayPal or cryptocurrency [12].
Strengths
- ECC memory stated on Starter, Standard and Enterprise
- Windows Server 2025 by default
- a 4 GB plan rated for six terminals at $29.99
- a four-city broker latency table
- a $0.99 three-day trial in three cities
Limitations
- MetaTrader is not pre-installed
- no Amsterdam trial
MyForexVPS
Infrastructure tier: forex-focused Windows VPS
Locations: London, Amsterdam, New York, Singapore
MyForexVPS is operated by ON2A FZ LLC, registered in Fujairah in the United Arab Emirates [9]. Gold has 2 cores, 4 GB of memory and 70 GB of SSD storage for 3 to 6 terminals at $19.99 a month, the lowest list price in this comparison, or $15.99 with a new-customer code. Silver (2 GB, 1 to 2 terminals) costs $14.99 and Platinum (4 cores, 8 GB, 7 or more terminals) $49.99. MT4 and MT5 come pre-installed, and a browser-based remote desktop console lets you check terminals without an RDP app [9].
Its broker latency table shows each broker from three cities. GAIN Capital UK’s mt4live114 server reads 0.8 ms from the UK column but 77 ms from the US column, while Pepperstone reads 2 ms from the US and 69 ms from the UK [9]. No measurement date or method is given. The London page mentions “connectivity to the LD4 and LD8 London trading ecosystem” without naming the building, and the site does not say whether the memory is ECC or whether the Windows Server 2019 or 2022 licence is included.
Its SLA (version 2.0, March 2025) sets 99.99 percent a month with a 5 percent credit per full hour of downtime, capped at the monthly fee, while the plan cards show 99.999 percent [9]. Announced maintenance on Saturday and Sunday from 09:00 to 22:00 GMT is excluded from the SLA. That is 10:00 to 23:00 UK time until the clocks change on October 25, 2026 [11], an hour past the Sunday open. Billing is in US dollars, and refunds apply within 7 days of activation.
Strengths
- the lowest list price for a plan rated for four or more terminals
- MT4 and MT5 pre-installed
- a three-city broker latency table
- an SLA with hourly credits
- a browser-based remote desktop console
Limitations
- data centre buildings not named
- ECC memory and Windows licence status not publicly specified
- SSD storage on all plans
- the maintenance window runs past the Sunday open during British Summer Time and is excluded from the SLA
- latency table undated
- refunds limited to 7 days
QuantVPS
Infrastructure tier: trading VPS and dedicated servers on AMD EPYC and Ryzen
Locations: forex plans in NY4 New York or LD4 London; 8 data centres in total
QuantVPS addresses copy traders directly: its forex page says you can “Run your master terminal and copier on one forex VPS” and that compatible copiers such as Replikanto and ETP run on its servers, with software licences sold separately [10]. You pick MT4 or MT5 at checkout and the VPS boots with it installed. Forex plans deploy in New York (NY4) or London (LD4), and the page gives latency as a target of 0 to 10 ms rather than measured figures.
Its sizing is conservative. VPS Starter (2 EPYC cores, 4 GB of DDR4, 50 GB of NVMe, $29.99) is rated for 0 to 1 terminals, VPS Lite (4 cores, 8 GB, 75 GB, $59.99) for 1 to 3, and VPS Pro (6 cores, 16 GB, 150 GB, $99.99) for 3 to 5, all on Windows Server 2022 with automatic off-site backups [10]. For a master and three followers that makes Pro the entry point, at $99.99 a month. The Performance line on Ryzen 9 9950X processors with DDR5 ECC memory costs more again.
Its SLA (October 9, 2026) sets 99.999 percent uptime with service credits and a maintenance window from Friday 10:00 PM to Saturday 9:00 PM Central time, which is Saturday 04:00 to Sunday 03:00 UK time, inside the forex weekend [10]. Refunds apply within 14 days only to new standard plans bought without a coupon or discount, and dedicated servers are excluded.
Strengths
- copier use described on its own forex page
- MT4 or MT5 installed at checkout
- automatic off-site backups on every VPS plan
- a 99.999 percent SLA with a maintenance window inside the forex weekend
Limitations
- the 4 GB Starter plan is rated for 0 to 1 terminals, so a four-terminal copy setup starts at $99.99
- ECC memory not publicly specified on the Standard line
- Windows Server 2022 rather than 2025
- latency given as a target, not measured per broker
- copier licences sold separately
- refunds only on new undiscounted standard plans
MetaTrader VPS
Infrastructure tier: virtual hosting built into the MetaTrader platform by MetaQuotes
Locations: more than 30 hosting points, chosen near the broker’s server
MetaTrader VPS is rented from inside the MT4 or MT5 terminal and hosts a copy of that terminal near your broker [6]. It costs $15 a month, or $10 a month on a 12-month term, with a 24-hour free trial, and MetaQuotes allocates up to 3 GB of memory and 16 GB of disk on demand. This is the only option in this comparison with copying built in: you can migrate an MQL5 Signals subscription, and copying then runs on the hosted terminal instead of your own computer.
The limits matter for copy setups. One rented terminal works with one trading account, so a master and three followers need four subscriptions, $60 a month at the monthly rate [6]. DLL calls are forbidden, scripts are not migrated, and you have no access to the hosted terminal’s desktop. The rules allow up to 32 charts with EAs on paid hosting. A local copier that links several terminals on one machine, such as FX Blue’s Personal Trade Copier, cannot run this way.
Strengths
- built-in MQL5 Signals copying with no extra software
- $15 a month per account with a 24-hour free trial
- hosting points matched to the broker’s server
Limitations
- one trading account per subscription
- no DLL calls and no desktop access
- cannot run a local copier between your own terminals
- processor and data centre details not publicly specified
- no published per-broker latency data
Mistakes that cost copy traders money
Hosting the copier far from one of the brokers. A master in London and followers in New York add a 78 ms round trip to one leg of every copy, according to Microsoft’s backbone figures [1]. If you can choose the follower broker, choose one in the master’s city.
Buying by memory instead of by terminal rating. QuantVPS’s $29.99 Starter has the same 4 GB and the same price as VPSforFX Standard, and the same 4 GB as VPSForexTrader Smart and NYCServers Standard, but QuantVPS rates it for 0 to 1 terminals and VPSforFX rates its plan for six, so a four-terminal setup at QuantVPS costs $99.99 [10][12].
Paying for MetaTrader VPS subscriptions to copy your own accounts. Four accounts cost $60 a month at the monthly rate [6], almost twice VPSForexTrader Smart at $31.99 or VPSforFX Standard at $29.99, and still cannot run a local copier between them [7].
Packing every follower under one Windows user. VPSForexTrader’s guidance is no more than 12 MT4 instances per user, and its guide puts the Windows limit at 32 [7].
Counting on a maintenance window that ends after the Sunday open. MyForexVPS’s window runs to 23:00 UK time during British Summer Time [9], an hour after the 22:00 forex open, which can leave follower accounts flat while the master trades the gap.
Which setup fits which copy trader
A trader copying one master into up to three followers at brokers in the same city fits VPSForexTrader Smart at $31.99 a month, with ECC memory and Windows Server 2025, and the $0.99 trial lets you log both brokers in and check the ping before paying for a month. VPSforFX Standard covers the same four terminals, with two spare on its rating, for $29.99, with ECC memory and Windows Server 2025 but without its buildings named [12]. Up to six followers fit Boost at $54.99, and up to nine fit Max at $79.99, both with daily backups.
Prop firm traders running one master into several evaluation accounts usually hit the terminal count before the memory limit, so plan by terminals and keep each follower’s Max bars low. If the followers sit at brokers in another region, the copy path crosses that distance whichever host you choose, so pick the node closest to the follower brokers and accept the gap on the master leg.
A trader who only wants to follow a public MQL5 signal in one account does not need a Windows server; MetaTrader VPS hosts the subscription for $15 a month.
Three findings from this comparison
None of the five Windows hosts bundles a trade copier. NYCServers and MyForexVPS pre-install MetaTrader, QuantVPS installs it at checkout, VPSforFX and VPSForexTrader leave it to you, and the copier software is always your own choice and licence [7][8][9][10][12].
Distance between brokers outweighs everything else in the copy path. Same-city legs measure in single milliseconds on the providers’ own tables, while London to Virginia is 78 ms on Microsoft’s backbone [1][7].
Terminal ratings, not memory, set the real price of a copy setup. Plans with the same 4 GB are rated anywhere from one terminal to six, which moves the entry price for a four-terminal setup from $19.99 to $99.99 [7][8][9][10][12].
Frequently asked questions
Does a trade copier need a VPS?
A local copier does, because the master and follower terminals must stay running, and FX Blue’s Personal Trade Copier only works between terminals on the same computer [3]. Cloud copiers such as Duplikium and Social Trader Tools run on their own servers and state that no VPS is needed [4][5].
How much delay does copying add?
The copier’s own processing is small: Duplikium states 1 to 3 ms internally [4]. Network legs decide the rest. VPSForexTrader’s tables show 1.19 to 2.1 ms from its London and New York nodes to the brokers listed there, while a master and follower in different regions add a 78 ms round trip or more [1][7].
Can I copy trades between MT4 and MT5 on one VPS?
Yes. FX Blue’s Personal Trade Copier works between MT4 and MT5 installations on the same computer, using its MT4 and MT5 EAs [3]. VPSForexTrader Smart is rated for up to four MT4 or MT5 terminals and VPSforFX Standard for six [7][12].
Which VPS has a built-in trade copier?
None of the five Windows hosts in this comparison bundles one [7][8][9][10][12]. MetaTrader VPS is the only option with copying built in, through MQL5 Signals, and it works one account per subscription [6].
Should the VPS be near the master’s broker or the followers’ brokers?
Both, if the brokers share a city, which is why matching broker locations matters more than the host. If they do not, place the VPS near the follower brokers when several followers share one broker, so that most orders take the short route.
References
[1] Microsoft Learn: “Azure network round-trip latency statistics”, dataset for the 30 days to July 30, 2026. Checked October 15, 2026. Supports the inter-region round trips.
[2] Microsoft Learn: “Hardware requirements for Windows Server” (Windows Server 2025 memory); MetaQuotes MQL5 Reference, “Organizing Data Access” (Max bars and memory use). Checked October 15, 2026.
[3] FX Blue: free downloads page and product descriptions for the Personal Trade Copier and Internet Trade Mirror. Checked October 15, 2026.
[4] Duplikium: product and pricing page for its cloud trade copier. Checked October 15, 2026.
[5] Social Trader Tools: product home page. Checked October 15, 2026.
[6] MetaQuotes: MetaTrader VPS plans and rules pages, MetaTrader 4 help on virtual hosting migration, and the MQL5 article “How to Subscribe to Trading Signals” (October 9, 2012). Checked October 15, 2026.
[7] VPSForexTrader: London, New York, Amsterdam and Hong Kong VPS pages, trial page, dedicated servers page, Terms and Conditions (version of July 20, 2026), and the setup guides “How to Overcome 32 MT4 Platforms Issue on Dedicated Server” and “How to Install Multiple MT4 Platforms on Your VPS or Dedicated Server” (January 2026). Checked October 15, 2026.
[8] NYCServers: LD4 forex VPS page, Service Level Agreement, Maintenance Policy (September 15, 2026), Terms of Service and Refund Policy (October 1, 2026). Checked October 15, 2026.
[9] MyForexVPS: forex VPS plans page, London data centre page, forex broker latency page, Service Level Agreement (version 2.0) and terms of service. Checked October 15, 2026.
[10] QuantVPS: forex VPS page, pricing page, Service Level Agreement (October 9, 2026), Refund Policy (October 8, 2026) and Terms of Service (October 9, 2026). Checked October 15, 2026.
[11] GOV.UK: “When do the clocks change”. Checked October 15, 2026.
[12] VPSforFX: homepage plan list, London and New York VPS pages, trial page, forex broker latency page, FAQ and Terms and Conditions (version of July 27, 2026). Checked October 15, 2026. Supports plans, terminal ratings, prices, trial terms, latency figures and the uptime figure.
Editorial note
Plans, prices, terminal ratings, maintenance and refund terms and latency tables in this guide were read from provider and software vendor websites on October 15, 2026. Prices are on monthly billing and exclude VAT; providers run promotions often, so confirm the amount at checkout. Latency figures from VPS providers and speed claims from copier vendors are their own and have not been independently tested. Microsoft’s figures describe its own backbone between data centres. This guide covers trading infrastructure only and does not constitute financial advice: trading performance depends on broker execution quality, market conditions, and trader skill, none of which a VPS can fully control. Send corrections through the contact page; we record them in the change log. This guide is published by VPSforFX, which is included in this comparison.
Change log
October 15, 2026: first version. Plans, prices, latency tables and service terms captured on October 15, 2026.
